The following is a list of primary support equipment utilized by Stellar Precision Components, Ltd. In the processing of products. This list is not all inclusive due to the cumbersome nature of such a document, but is intended to generally convey production capabilities.

• CNC Lathes
• CNC Mills
• EDM
• Grinders
• Welding Equipment
• Fabrication Equipment
• Sawing Capacity
• Handling Equipment
• Inspection Equipment
• Non-Destructive Testing
• Heat Treating Equipment
• Teflon Coating Equipment

COMPUTER NUMERICAL CONTROL LATHES

1. Okuma CNC Lathe, Model LB45 Big Bore.
2. Okuma CNC Lathe, Model LB35II. swing dia. over bed 27.56. Distance between centers 75". 12 tool turret. Swing out OSP-U1100L-1 touch IGFcontrol. Built-in chip conveyor and coolant system.
3. Okuma CNC Lathe, Model LB35II. swing dia. over bed 27.56. Distance between centers 75". 12 tool turret. Swing out OSP-U100L-1-touch IGF control. Built-in chip conveyor and coolant system.
4. Okuma CNC Lathe type Captain L370. Swing dia. 20.87. Distance between centers 20.47. 12 tool turret. Swing out OSP-E100L control. Built-in chip conveyor and coolant system.
5. Okuma CNC Lathe type Captain L370. Swing dia. 20.87. Distance between centers 20.47. 12 tool turret. Swing out OSP-E 100L control. Built in chip conveyor and coolant system.
6. Okuma Machinery Works, Ltd. CNC Lathe, 15" swing x 30" length, Model LB12, Year 1989, with swing-out control panel, Model OSP500L-G, with built-in coolant pump, with LNS Hydrobar feeder, Type 6.42-HS-5.2 , 734, with hydraulic power supply, with miscellaneous tooling.
7. Okuma CNC Lathe, Model LB25, 28" swing x 72" length, with swing-out control panel, with built-in video monitor, built-in coolant system, 1 - Henning chip conveyor, Model 100029LB251250, Date 1991, with miscellaneous tooling.
8. Okuma CNC Lathe, Model Cadet-L1420, 28" swing x 48" length, with OSP 700L Control, built-in IGF programming capabilities, Henning chip conveyor, Model LNC10L1420, Date 1998, with miscellaneous tooling.
9. ADMAC IGF .

Back to Top

COMPUTER NUMERICAL CONTROL MILLING MACHINES

1. HAAS 5 AXIS CNC Vertical Milling Center, Model VF-3, Capacity X axis=40", Y axis ="20", Z axis ="20". Table Size 48" x 18". High Speed.
2. Okuma 5 AXIS CNC Horizontal Milling Center, Model #MA-60HB. Capacity: X axis=40", Y axis=32", Z axis=32"
   Table size 24.800 x 24.800. Max load capacity 2,640 lbs. 60 tool change magazine. Built-in chip conveyor and coolant system.
3. Mori-Seiki MV-40, 4 Axis Simultaneous Vertical Milling Machine with 30 station automatic tool changer. Capacity: 38" x 22" x 28"
4. TNC Horizontal-Vertical Milling Center, FIL, Model FA200, Type 200, 5" horizontal, table type, 72" x 36" x 36" capacity. 95" x 27 1/2" table, 1 top mounted vertical milling head, with 1 - Heidenhain swing-out control panel, Model TNC131, X,Y&Z axis, with digital readout
5. Hardinge VMC-800 II, Troyke 4th axis. "x" axis 31.4961", "y" axis 20.15", "z" axis 20.0787. 8000 rpm max spindel. Fanuc Series 18i-MB control. 25 tool holder.
6. Hardinge VMC-800 II, Troyke 4th axis. "x" axis 31.4961", "y" axis 20.15", "z" axis 20.0787. 8000 rpm max spindel. Fanuc Series 18i-MB control. 25 tool holder.
7. Hardinge VMC-800 II, Troyke 4th axis. "x" axis 31.4961", "y" axis 20.15", "z" axis 20.0787. 8000 rpm max spindel. Fanuc Series 18i-MB control. 25 tool holder.
8. Okuma ES-V3016 , OSP10M Control SMW programmable Rotary 4th Axis, 20 station tool changer, 29" x 16" x 20 capacity.
9. MasterCam X

Back to Top

EDM EQUIPMENT

1. Mitsuibishi FX20, Submerged Arc Wire 5 axis EDM. Work piece capacity 41.3" x 31.5" x11.6"x363 lbs. Wire sizes .008"-.012"
2. Mitsubishi FX10K, Submerged Arc Wire 5 axis EDM. Work piece capacity 31.5" x 22.6 " x8.5"x227 lbs. Wire sizes .004"-.012"
3. Mitsubishi FA10, Submerged Arc Wire 5 axis EDM. Work piece capacity 31.5" x 22.6 " x8.5"x227 lbs. Wire sizes .004"-.012"
4. Japax CNC Wire EDM, Model LDM-35/50, with 1 control panel, Model JAPT4G, Orin coolant unit, with filter tanks.

Back to Top

GRINDERS

1. Thompson Surface Grinder, with 14" x 10" magnetic chuck with control unit, 1 built-in coolant system.
2. Harig 618 Grinder Chrome Ways, Tool Tray; 6" x 18" electric chuck, vari-hold rec., hinge table stop, work light.

Back to Top

WELDING EQUIPMENT

1. Lincoln Arc Welder, Model Tig 300/300/AC/DC, 300 amps, with Bernard 3500SS coolant unit.
2. L-Tech Mid Welder, Model Linde 225, with built-in wire feeder, with cart base, cable and torch.
3. Ideal Arc 600 Lincoln Welder w/LN-9 Digital Wire Feeder, MIG Gun, Flux Tank and SAW Gun.
4. Airco Oxygen/Propane Torch.
5. Harris Oxyacetylene Welding System.
6. Ransome Welding Positioner, Model B-ITA, 100# capacity, Year 1975, 16" diameter table, with 6" - 6 jaw chuck, fractional HP motor drive, with hand operated tilt wheel.
7. Roper Whitney Spot Welder, Model SW/30, 5 KVA, with built-in timer.
8. Preheat Table 500 x F Capacity.
9. Miller 200 Amp Seam Welder.
10. Bug-O Burning & Welding Systems w/variable speed adjustment and Harris torch.
11. Milwaukee Grinders w/4 1/2" x 9 1/2" right angle.
12. Phoenix Dry Rod Oven, Type 300, Model PP6.
13. P&II 200 Amp Welder.
14. Pandjiris Weldment Co. Welding Positioner, Model 10-4, 1000# capacity, 24" x 24" table.

Back to Top

FABRICATION EQUIPMENT

1. "Modern" Hydraulic Press, 200 ton capacity.
2. "Niagra" Shear, 1/4" x 48" capacity.
3. "Connecticut" Press Brake, 1/4" x 48" capacity.
4. Enerpac 2000# Hydraulic Press.
5. Bliss 20 Ton Punch Press.
6. Crystal Craft Sandblaster.
7. Burning Equipment.

Back to Top

SAWING CAPACITY

1. Cosen Automatic Horizontal Saw, 10" capacity , Standard Hydraulic Shuttle Vise.
2. Roll-In Saw, Inc. 20" Vertical Type Band Saw, Type Journeyman Model 20JW8229, with Grob blade welder, Type RWA.
3. Continental Machine Tool Co. Horizontal Band Saw, Model BS120A, 2 HP motor, 12" round capacity, 12" x 7" rectangle capacity, with built-in coolant pump.

Back to Top

HANDLING EQUIPMENT

1. Special Built Bridge Crane, 10 ton capacity, 20" I-beam span, 12' long with bottom running motorized end trucks, 2 - Acolift 5 ton capacity electric chain hoists, with motorized trolley, floor pendant controlled with 2 - 12" I-beam cross supports, 16', 8' - 8' I-beam upright supports, 15' high.
2. Baker Forklift Truck, Model FMD-040, Year 1966, 4000# capacity, liquid propane engine, pneumatic tires.
3. Clark Forklift Truck, Model C500Y80, Year 1975, 8000# capacity, liquid propane engine, pneumatic tires.
4. 1/2 - Ton Overhead Crane.
5. Portable hydraulic shop crane, 2 ton capacity, with telescoping boom.
6. 5,000 lb. floor pallet lift.
7. 1-ton overhead hoist.
8. Yale 2-Ton Electric Crane.
9. Cable King Electric Hoist - 2-Ton Model 405P.
10. Cable King Electric Hoist - 2-Ton Model 405P.
11. Cable King Electric Hoist - 1-Ton Model 201P.

Back to Top

INSPECTION EQUIPMENT

1. Brown & Sharpe Global "Image 9128" CMM 36" (x) by 48" (y) by 31" (z) travel equipped with Renishaw PH10MQ Motorized Head, Renishaw TP 200 Touch Trigger Probe, Intel DuoCore Computer, 3Gb Ram, 250Gb hard drive, 21.4" LCD Monitor, HP Deskjet printer, PC-DMIS Measurement Software, Data Page/RT Statistical Process Software.
2. Brown & Sharpe "Mistral" CMM 26" (x) by 28" (y) by 18" (z) travel equipped with Renishaw PH1M Motorized Head, Renishaw TP-20 Touch Trigger Probe, Intel DuoCore Computer, 3Gb Ram, 250Gb hard drive, 21.4" LCD Monitor, PC-DMIS Measurement Software, Data Page/RT Statistical Process Software.
3. Mitutoyo Coordinate Measuring Machine, Model #F-704, with 33" x 22" x 5" black granite surface top, Dell Optiplex PC, Canon Inkjet.
4. Scheer-Tumico Optical Comparator, Model 22-1500, 14" diameter screen, floor type.
5. 2 - Pratt & Whitney 12" Supermicrometer, #M1471.
6. Mitutoyo Profile Projector, Model PH361A, 14" diameter screen with 1 - Geo Check readout, X & Y axis.
7. Technicorp Alloy Separator, Model 950.
8. Mitutoyo #401 Surftest.
9. Brown & Sharpe No. 599-1011-14-P-1, 14" Micro-Hite EDP No. 865433.

Back to Top

NON-DESTRUCTIVE TEST EQUIPMENT

1. Magnetic Particle Testing
   • 1 Magna-Flux P-1500, 1 - Parker Test Yoke, 1 - steel table, 5' x 2 1/2' w/Wet & Dry Magnetic Particle Capability and High Output Pneumatic Fixturing.
   • Parker Contour Probe
     Magnetic Particle Yoke
2. Ultrasonic Test Equipment
   • Kraut Kramer USIP11
     A Scan Ultrasonic Flaw Detector w/Assorted Probes
3. Liquid Penetrant Test Equipment
   • Liquid Penetrant Test Kit w/Group 1 Dye Penetrant Testing Capabilities.
4. Ultrasonic Parts Cleaner.
5. Hydraulic Test Equipment
   • Two (2) Complete Test Units w/30,000 PSI Maximum Pressure
6. Passivation Equipment

Back to Top

HEAT TREATING EQUIPMENT

1. Area Electric & Fabricating Furnace (Eectric)
   • Maximum Temperature of 1200 degrees F
   • 48" x 48" x 48"
   • Watlow controller with data recording and charting software
2. L&L Special Furnace (Electric)
   • Maximum Temperature of 2350 degrees F
   • 24" x 24" x 24"
   • Watlow controller with data recording and charting software

Back to Top

TEFLON COATING EQUIPMENT

1. Type "S" Teflon Coating Booth and Sprayer
   • 60" x 60" x 60" Booth

Back to Top

Related Pages

• Company Profile
• Capabilities
• Facilities